Buy Weathershield Multi-Surface Fungicidal Wash
Weathershield Multi-Surface Fungicidal Wash from Dulux is suitable for brush application only to new or previously painted interior or exterior wood or masonry surfaces contaminated with mould, algae, fungi or lichen.
Apply the solution to all affected areas with a brush. Leave for 24 hours and then thoroughly rinse and scrub with clean water to remove residues and dead growth. Failure to remove residues may result in discolouration of subsequently applied coatings. Repeat the process if necessary. Do not apply in wet weather. Badly affected areas, or if lichen is present may require the use of high pressure water-hosing to remove all organic growth completely. When the surface is fully dry, apply the appropriate Dulux or Weathershield finishing system. TIP: apply only in dry conditions, above 10°C and when bad weather is not forecast.
Causes serious eye irritation. Causes skin irritation. Harmful to aquatic life with long lasting effects.
- Coverage: Up to 24m2/litre
- Drying Time: Leave 16-24 hours to dry.
- Coats: 1
- Mouldtec formulation protects the paint against mould for five years, keeping your bathroom looking great for longer.
Step 1: Wash away mould, algae, fungi and lichen from wood or masonry. Suitable for brush application.
Step 2: Remove as much of this product as possible from the brush with a cloth and then wash with water.
Step 3: Store this product in dry conditions and protect from extreme temperatures.
Multiple colours available; to choose a colour, please speak to one of our friendly staff on 02038839057
Buy yours with us online at www.insulationbee.co.uk
