Buy Dulux Once Satinwood |

Dulux Once Satinwood has been specially formulated to give a perfect satin finish on interior primed or painted wood or metal surfaces in just one coat. It does not require an undercoat.

Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.

Finish: Satin
Coverage: Up to 12m2/litre
Drying Time: 16 hours
Coats: 1
One coat
No undercoat required

Step 1: Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry.

Step 2: For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.

Step 3: Store paint in dry conditions and protect from extreme temperatures

Multiple colours available; to choose a colour, please speak to one of our friendly staff on 02038839057

Buy your with us today at www.insulationbee.co.uk