Buy Dulux colour mixing Satinwood
Dulux colour mixing Satinwood paint gives interior wood and metal a hard-wearing, subtle sheen finish. Ideal for adding a modern effect to your home.
Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry.
- Finish: Satin
- Coverage: Up to 16m2 / litre
- Drying Time: 6 hours
- Coats: 2
- Water based, low odour
- Quick drying
Step 1: Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate Polycell products.
Step 2: After use, remove as much paint as possible from brushes before cleaning with water. Store paint in dry conditions and protect from frost
Step 3: Store paint in dry conditions and protect from extreme temperatures.
Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057
Buy yours with us today at www.insulationbee.co.uk
